Used-oil re-refinery and distillation plant at dusk in Saudi Arabia

Globally Sourced · Built & Installed in Saudi Arabia

We manufacture the components. We install the plant.

Iron Stake builds the equipment that powers used-oil recycling plants — reactors, columns, condensers, thermic heaters, pumps and tanks — and installs them as complete, commissioned plants across Saudi Arabia. Backed by engineering design and MEP support.

Founded — a decade of delivery
2015
Years of founder's field experience
20+
Countries — KSA & UAE
2
Aligned with Vision 2030
V2030
Used Oil SolutionsOil Filtration & PurificationBIMCADGISBOQProcess EngineeringP&IDSimulationMEP — HVAC · Electrical · Plumbing · FirefightingStandalone BoilersHeat ExchangersReplacement & RevampsIndustrial SupplyLubricantsEPC SupportUsed Oil SolutionsOil Filtration & PurificationBIMCADGISBOQProcess EngineeringP&IDSimulationMEP — HVAC · Electrical · Plumbing · FirefightingStandalone BoilersHeat ExchangersReplacement & RevampsIndustrial SupplyLubricantsEPC Support

What We Do — And What We Don't

Clear scope. No confusion about where we fit.

We are a manufacturer-installer. Here is exactly what that means — so your enquiry starts in the right place.

What we do

  • Manufacture plant components

    Reactors, columns, condensers, thermic heaters, pumps, tanks and the full utility set — fabricated in our own works.

  • Install & commission plants

    Complete used-oil recycling plants installed and commissioned in Saudi Arabia by our own site teams.

  • Engineering design

    BIM, CAD, GIS, BOQs, P&IDs and process simulation from our engineering center.

  • MEP support services

    HVAC, electrical, plumbing, firefighting and low-current support with testing and commissioning.

  • Maintenance & replacement

    Old heat exchanger and equipment replacement, revamps, rerating and shutdown support.

  • Industrial supply

    Valves, pumps, motors, instrumentation, PPE and specialty lubricants — sourced and delivered.

What we don't do

  • Crude oil or petroleum trading

    We are not traders — we build and install industrial plants and equipment.

  • Second-hand equipment sales

    We supply new, code-compliant equipment with documentation — not refurbished or grey-market stock.

  • Plant operation on your behalf

    We install, commission and hand over — operation stays with your team (we do supply manpower support).

  • Civil works beyond plant scope

    Foundations, sheds and plant-area civics yes; general building construction, no.

  • Non-industrial supply

    No consumer goods, no general trading — industrial scope only, executed properly.

  • Upstream oil & gas

    No exploration or wellsite services — our world is process plants, MEP and industrial facilities.

Looking for the equipment list? Browse the product catalog →

About Us

Industrial supply and engineering support, from concept to commissioning.

We combine deep field experience — spanning petroleum plants, MEP systems and complex industrial projects — with specialist industrial supply, engineering support and EPC project services.

Our mission is simple: to be your reliable partner from concept to commissioning. One team for engineering, sourcing, supply, installation support and documentation.

Who We Are

A multidisciplinary engineering and industrial supply company, headquartered in Jeddah, Saudi Arabia, with a UAE branch in Hamriyah Free Zone, Sharjah — and a dedicated engineering delivery center.

What We Do

Used-oil solutions, engineering services (BIM, CAD, GIS, BOQ), MEP support, industrial supply — valves, pumps, boilers, thermic heaters, fabricated items — lubricants and petroleum industry support.

Who We Serve

EPC contractors, petroleum process plants and industrial facilities across KSA, the UAE and the wider Middle East — from concept to commissioning.

Welder fabricating a pressure vessel in the Iron Stake workshop
20+

Years of founder-level field experience in the petroleum & industrial sectors, behind every project we deliver.

How You Can Engage Us

Three ways to work with Iron Stake — pick your scope.

Not every project needs a full EPC contractor. Engage us for the whole journey — or just the part you are missing: fabrication, design, or people on site.

A

Fabricate & Deliver

Own-works fabrication → Saudi site

We engineer and fabricate your equipment in our own works — boilers, heat exchangers, distillation skids, filtration systems — inspect it, ship it and deliver it customs-cleared to your site anywhere in the Kingdom.

  • Turnkey equipment packages, built to code
  • QA/QC, FAT and third-party inspection
  • Customs-cleared logistics to KSA sites

Best for: complete equipment supply

Most Flexible
B

Design Only

Drawings & engineering packages

Your project, our drawings. BIM, CAD, GIS, BOQs, P&IDs, process simulations and full IFC documentation delivered from our engineering center — ready for your approval authorities and construction teams.

  • BIM / CAD / GIS / BOQ production
  • Process engineering, P&IDs & simulation
  • Approval & IFC documentation packages

Best for: EPC contractors & consultants

C

People & Installation Support

Manpower, on demand

Specialist manpower and installation support without fixed overhead — mechanical, MEP and process teams for installation, replacement, revamps, shutdowns and commissioning, mobilized regionally with short lead times.

  • Installation & replacement crews
  • Turnaround & shutdown support
  • Testing, commissioning & handover

Best for: turnarounds & site scopes

Flagship Service

Used Oil Solutions — anything and everything in used oil.

Used engine oil, hydraulic oil, gear oil and industrial waste streams are a disposal cost — until they are re-refined back into saleable base oil and fuel. We design, supply and support the plants that make that conversion pay.

Anything in used oil

Filtration, purification, reclamation and re-refining — plus waste-oil management and lube-plant process engineering.

Batch to continuous

From skid-mounted batch units to fully automated continuous trains — expandable as your volumes grow.

Process to product

Feedstock evaluation, process simulation, equipment specs and product testing — engineered around your oil stream.

Standard feed rate per train
2,000 L/hr
Typical liquid recovery incl. diesel
92–94%
Raw + product storage per side
350 KL
Color quality verified to standard
ASTM D1500

The Re-Refining Train

  1. 01

    Pre-treatment

    Dehydration and de-lighting — water and light fractions are removed before distillation.

  2. 02

    Atmospheric Topping

    Gasoline and diesel-range fractions are stripped off in the topping column.

  3. 03

    Vacuum Distillation

    Base-oil fractions are vaporized under high vacuum — below cracking temperature, preserving oil quality.

  4. 04

    Wiped-Film Evaporation

    Thin-film, short-residence evaporation separates base oil from asphalt residue with minimal thermal stress.

  5. 05

    Clay Polishing

    Regenerative clay treatment restores color, oxidation stability and the properties of new oil.

  6. 06

    Blending & Storage

    Finished base-oil grades are blended, tested and transferred to storage for dispatch.

Output productsSN 150 base oilSN 300 base oilSN 400 / SN 500Diesel-range fuelAsphalt residueReclaimed lubricants

How We Work

Requirement to delivery, in six steps.

  1. 01

    Requirement

    Send your requirements — specifications, drawings, BOQs or a site problem statement.

  2. 02

    Engineering

    BIM/CAD/GIS, BOQ, process engineering and documentation from our engineering team.

  3. 03

    Sourcing

    Fast sourcing and fabrication through our global supplier network with QA/QC and inspection.

  4. 04

    Delivery

    Coordinated logistics to your site — customs-cleared, on schedule, with documents.

  5. 05

    Installation

    Installation support and site manpower for mechanical, MEP and process scopes.

  6. 06

    Commissioning

    Testing, commissioning and complete project documentation to handover.

Saudi Arabian industrial skyline

Saudi Arabia · Vision 2030

A Saudi company, built for the Kingdom's industrial decade.

Headquartered in Jeddah and aligned with Vision 2030 — supplying, engineering and supporting the industrial projects transforming the Kingdom.

Headquartered in Jeddah

A Saudi company, close to the market — with fast mobilization to Dammam, Jubail, Riyadh and the Western Region.

Vision 2030 aligned

Supporting the Kingdom's industrial diversification with used-oil recycling, localization and industrial supply capability.

KSA + UAE corridor

Regional sourcing with Saudi delivery — the right balance of cost, speed and compliance.

Industrial supply, in-country

Valves, pumps, boilers, heat exchangers and spares sourced and delivered without long import lead times.

Safety & Quality

Safety is not a department — it is how we work.

Every scope — a single exchanger replacement or a complete re-refining plant — is delivered under the same discipline: code-compliant work, inspection at every gate, and documentation to handover.

01

Code-Compliant Fabrication

Equipment designed and built to ASME / TEMA / API conventions, with material traceability and weld documentation.

02

Inspection at Every Gate

QA/QC hold points from raw material to final FAT — with third-party inspection arranged when your project requires it.

03

Documentation to Handover

Datasheets, P&IDs, O&M manuals and test certificates delivered as a complete handover package.

04

Safety Is How We Work

Site teams follow client HSE plans and permit-to-work systems — safety ahead of speed, on every scope.

Have a requirement? Send it — drawings, BOQ, or just a problem statement.

We respond with a practical, costed view — manufactured, delivered and installed.